Description
Passive VGA CAT5 Extender
Features:
- Passive device, no power required.
- Including 2 units as transmitter and receiver.
- Supports up to 1280×1024 pixels.
- Up to 100 meters via standard 4 pairs CAT5e STP or UTP cable instead of VGA cable.
- Transmitter built in virtual DDC to avoid improperly setting at resolution and frequency.
- Transmitter built in sync mode selection for signal stability.
- Receiver built in sync filter level adjustment for signal stability.
- Perfect for classrooms, lecture halls, tradeshows, video information displays…etc.
Specification :
Max. Distance via CAT 5 Cable | |
640×480 pixels (15MHz) | 135M |
800×600 pixels (30MHz) | 105M |
1024×768 pixels (60MHz) | 75M |
1280×1024 pixels (100MHz) | 60M |
ITEM NO. | TTP111VGA-T | TTP111VGA-R |
Devices | DVR, PCs, Laptops | VGA Monitors, Projectors |
Input Signals | Video: 1 Vp-p | |
Horizontal & Vertical SYNC : TTL standard. 300kHz max. bandwidth | ||
Insertion Loss | Less than 3dB per pair over the frequency range | |
Video Signal Return Loss | -15dB max from DC to 60Mhz | |
RJ45 Pin Configuration: EIA 568B Wiring standard | R video (Red): Pin 1 (+), Pin 2 (-) Balanced G video (Green): Pin 4 (+), Pin 5 (-) Balanced B video (Blue): Pin 7 (+), Pin 8 (-) Balanced Horizontal Sync: Pin 3, Vertical Sync: Pin 6 | |
Impedance | Input : RGB 75 ohms (DB15 HD) Unbalanced | Input : RGB 100 ohms (RJ45 shielded) Balanced |
Output : RGB 100 ohms (RJ45 shielded) Balanced | Output : RGB 75 ohms (DB15 HD) Unbalanced | |
Horizontal and vertical sync : TTL standard | ||
Setting Switch | 2 Stage Slide Switch | 5 Stage Dip Switch |
Transmission Distance | 60 -135 meters depend on image resolution | |
Link Cable | CAT5 / CAT5e / CAT6 / STP or UTP Cable | |
Temperature | Operation: 0 to 55 C, Storage: -20 TO 85 c, Humidity: up to 95% | |
Dimensions W x H x D mm | 110x77x26 |